4
ELECTRICAL CONNECTION
For your protection, this unit is equipped with a 3
-‐
conductor cord set that has a molded 3
-‐
prong
grounding
-‐
type plug, and should be used in combination with a properly connected grounding
-‐
type
outlet.
•
Do not under any circumstances cut or remove the third
ground prong from the power cord
supplied. For personal safety, this appliance must be properly grounded.
•
The cord should be secured behind the unit and not left exposed or dangling to prevent
accidental injury.
•
When a standard 2
-‐
pin wall outlet is encou
ntered, it is your responsibility to have it replaced
with a properly grounded 3
-‐
pin wall outlet.
•
Never unplug the unit by pulling the power cord. To disconnect the
appliance, always grip the plug firmly and pull straight out from the wall
outlet. When mo
ving the unit, be careful not to damage the power cord.
•
The unit should always be plugged into its own individual electrical
outlet with a voltage rating that matches the rating label on the unit.
•
Do not pinch or kink the power supply cord.
•
Repair or repl
ace all power cords that have become frayed or damaged.
Do not use a cord that shows cracks or abrasion damage along its length
or at either end. When moving the appliance, be careful not to damage
the power cord.
INSTALLATION INSTRUCTIONS
Before Using Your Wine Cooler
•
Remove all packing material before using your cooler. Check to be sure all parts are included and
that the cooler is in good condition.
•
Clean the interior surface with lukewarm water using a soft cloth before first use.
Installation of Your Wine Cooler
•
T
his appliance is designed for free standing or built
-‐
in (full recessed) installation.
•
Position the cooler in a dry and airy place. The recommended ambient temperature should
be between 50° and 80°F.
•
Locate the wine cooler away from direct sunlight and sou
rces of heat such as a stove, heater,
radiator, etc. Direct sunlight may affect the acrylic coating. Sources of heat may increase
electric consumption. Extreme ambient temperatures may cause the unit to malfunction.
•
Avoid locating the unit in moist areas.
•
Place your cooler on a solid, level surface (other than carpet). This will ensure vibration and
noise
-‐
free operation. To level your wine cooler, adjust the front leveling legs at the base of
the cooler.
Improper use of the grounded plug can result in the risk of electrical shock. If the
power
cord is damaged, frayed or shows cracks or abrasions across its length, have it
replaced at an authorized service center.
Extension Cord
CAUTION:
It is strongly recommended that you do not use an adapter or an extension cord with this unit.
