Firewall
132mm
(5.2”)
B’
B
B=B’
A
A=A’
A’
! Engine thrust on balk head
is already adjust at factory
Using a aluminum motor mounting plate
as a template, mark the plywood motor mounting
plate where the four holes are to be drilled .
Remove the aluminum motor mounting plate and drill a
1/8”(3mm) hole through the plywood at each of the four
marks marked .
3mm
Note: The aluminum motor mounting included with electric
motor set.
5x90mm.......4
5mm nut.......12
5mm washer...16
3mm screw/nut...4
SIDE-VIEW /
Seitenansicht
TOP-VIEW /
Draufsicht
Firewall
Shift the location of the fuel tank, battery pack as needed to obtain the specified CG.
Rudder servo
Throttle servo
15- Electric Motor
FUSELAGE - BOTTOM VIEW (GP version)
2mm
Cut the opening
Nose gear pushrod
Throttle pushrod
FUEL TANK
3x10mm screw
2mm
1~2mm
Connector
...3
16- Cowling
17- Servo - linkage
