5. Insert and fasten the
M4 screw at the bottom
6. Plug the following
cables back into their original connector positions
on the PSU
2x 6-pin red & black DC cables
10-pin yellow signal cable
2-pin red & black DC cable
7. Install the fan by using a PZ2 bit to insert and fasten the
side M4 screw and bottom M4
screw
on the flange of the fan
8. Plug the
fan connector
back into the main board
9. Put the top panel back in place and
fasten with the 8 Torx screws
A100K11693
DOC NO.
