Remove the PSU according to the following procedure:
1. Press the PSU to the front of the cabinet
2. Press the PSU to the center of the cabinet to release it from the bottom clamp at the side-wall
3. Tilt the PSU and lift it out
3
Installing the New Power Supply Unit
To install the new PSU:
1. Insert the PSU in an angled position
2. Slide the bottom-edge of the unit under the
clamp
at the side-wall of the cabinet
3. Press the PSU to the rear and slide the top edge under the rear cabinet flange
4. Use a
hex key to insert and fasten the 2 button-head M4 screws
at the back panel of the
amplifier
2
3
1
