Page 24
ACM Telephone System – AMC-M-A
A100K 10430 v.1.0
Set IP gateway (router)
Route type ‘
Host’
is used to set up a route to a single device outside the
subnet of the AlphaCom.
Route type ‘
Net’
is used to set up a route to another network.
Route type ‘
Default’
is used to set up a general route to any device
outside the subnet of the AlphaCom.
z
Select
System Configuration > Routes
z
Select type of IP route
-
default IP route, specific IP route or specific host route
z
Default IP route
.
Enter only gateway (IP address) and Ethernet port (Eth0/1)
z
Network route
.
Enter destination IP address, network mask, gateway and Ethernet
port
z
Host route
.
Enter IP address, gateway and Ethernet port
z
Save
and
Apply
changes
6.4 Enter License Key
z
Obtain license key from your ACM distributor.
z
Select
System Configuration > License Key
z
Enter the key string under
New License Key
z
Press the
Insert new license key
button to install this license.
The license configuration is shown on top of the page.
Note! The ACM-M-A-V2 requires IP station license and SIP trunk licenses
for the number of IP stations and analogue telephone trunks the
exchange shall support.
Figure 24 AlphaWeb License Manager
