Vingtor Stentofon 1021001100, Инструкция по установке и эксплуатации

Страница: 24 / 32

24
A100K11209 v.1.4
VSS-V2 Technical Manual
8.2.2 Administrator site
● For authorized personnel only, password needed.
-Normally set up at installation.
● Settings for signal processing algorithm.
Automatic Gain Control (AGC)
Enabling AGC, the algorithm will adjust the level of the output to be
constant.
Ambient noise level (Squelch)
The squelch button can be used to adjust the threshold level for the
detection algorithm. The threshold level is adaptive, which means that
it is calculated automatically based on frame-by-frame data available.
However, threshold offset adjustment is available to the user via the
squelch button, or Ambient Noise Level slider from the webpage.
8.2.3 IP Configuration
● When setting the IP configuration, default address is 169.254.1.10
which is the address of the VSS web interface page. This can be
changed to conform to the existing network.
●
●
●
●
●
●
●
●
●
●
●
●