VINCENT SV-237MKII, Инструкция по эксплуатации

Страница: 45 / 76

45
Operation Button(s) Description
Switch on and off POWER (9)
The amplifier is switched on and off using this button at the front panel.
It has no standby option. When switched off the device is internally
separated from the AC power. The LED associated to the selected input
channel (7) will be illuminated if the device is switched on and not
muted. As a precaution, after switching on, the volume setting (5)(25)
of the preamplifier should be reduced.
Select an input
INPUT (4)
Input
selection
keys (23)
At the front panel: If you turn the selector knob “INPUT”, you select one
of the devices connected to the inputs on the back of the SV-237 MKII
(14/15/16) for playback. Using the remote control: A short touch on
the button for the desired input channel (e.g. “S1”) changes to the
playback of the audio source connected there.
The LED associated to the selected input channel will be illuminated at
the front of the appliance. Before switching over the input channel, the
volume (5)(25) should be turned down as a precaution!
Change the volume
VOLUME (3)
VOLUME
/
(25)
At the front panel: Turn the knob “VOLUME” clockwise to turn up
the volume and counter-clockwise to turn it down. Using the remote
control: Press and hold the button “VOLUME ” to raise its value. Use
“VOLUME ” to lower the volume level. The volume setting controls
the speakers and the signal level at the “PRE OUT” (13) but does never
influence the signal at the output “REC OUT” (12).
Mute the speakers and
the preamplifier output
MUTE (22)
The MUTE function can only be activated or deactivated with the
remote control. It switches off the loudspeakers, the preamplifier output
“PRE OUT” (13) and the recording output “REC OUT” (12). When
the amplifier is muted, the LED in the volume knob will be blinking and
the LED of the selected input is switched off. Pressing the MUTE button
again restores the volume to its original setting.
Change the treble pro-
portions of the sound
TREBLE (1)
With the “TREBLE” control knob on the front of the device you affect
the proportion of higher frequencies in the sound. Turning it in clockwi-
se direction increases the treble intensity and moving it in anticlockwise
direction reduces it. In the middle setting the treble proportions of the
input signals remain unchanged. The adjustment of the treble control
only has an effect if the button “TONE” (6) has been pressed. This tone
control affects the loud-speaker and headphone signals as well as the
output “PRE OUT” (13). The signal of the output “REC OUT” (12) is
independent of this.
Change the bass
proportions
of the sound
BASS (2)
With the “BASS” control knob on the front of the device you affect the
proportion of lower frequencies in the sound. Turning it in clockwise
direction increases the bass intensity and moving it in anticlockwise di-
rection reduces it. In the middle setting the bass proportions of the input
signals remain unchanged. The adjustment of the bass control only has
an effect if the button “TONE” (6) has been pressed. The bass setting
influences the signal of the loudspeakers and at the “PRE OUT” (13).
The signal of the output “REC OUT” (12) is independent of this.
OPERATING THE APPLIANCE