VINCENT 189818, Инструкция по эксплуатации

Страница: 31 / 56

Vincent
31
Adjustments for MC systems
Input impedance: 1000 ohms
Input capcitance: 15 pF
The permanent input resistor cannot be deactivated. The input impedancecan be adjusted by using swit-
ches
3 to 6 (adjustment units
(10)
). All matching resistors are connected in parallel, therefore allowing
impedance values between 99 ohms (all resistors used) and 1000 ohms (no additional resistors used).
This is how you can find the best settings:
First listen to your favorite record using the highest impedance, then the lowest, and finally select a resistor
with a value of about 600 ohms. Now try different adjustments until you get the results you want.
All values can be found in the table below.
Keep in mind to set both channels to the same value!
Table of values (impedance)
CONFIGURATION
Position „ON“ Impedanz Position „ON“ Impedanz
keiner 1000 Ohm
6 783 Ohm 3 130 Ohm
5 600 Ohm 3+6 126 Ohm
5+6 514 Ohm 3+5 120 Ohm
4 405 Ohm 3+5+6 116 Ohm
4+6 364 Ohm 3+4 109 Ohm
4+5 319 Ohm 3+4+5 102 Ohm
4+5+6 293 Ohm 3+4+5+6 99 Ohm