vimec V64-74 B.I., Руководство пользователя

Страница: 20 / 52

7602116
- Fix the down limit stop plate (SQ16 or SQ12) (Fig. 12/g).
- Fix the up limit stop plate (SQ16 or SQ12) and the up
overlimits microswitch (SQ4) (Fig. 12/h).
- Connect the safety gear microswitch connector (SQ2)
-Fig. 12/f.
- Fix the lift body to the carriage by means of the 3
screws - Fig. 12/d, checking that it is horizontal.
(Tightening torque M10x1 - 3.5 DaNm).
- Use a bit with diameter 10 mm to drill a hole at least
4 mm deep in the carriage plate through the M12 hole
(Fig. 18/a) on the frame. Then screw the M12x25
stud-bolt supplied into the hole and fix it with the nut
provided.
- Fit the drive chain (Fig. 18/b) with links as supplied
and adjust using the chain stretcher (Fig. 18/c), pre-
mounted on the underside of the carriage.
N.B.: Do not over-stretch the chain.
- If necessary, use the handwheel for manual operation
to adjust the chain in order to simplify fitting of the chain
stretcher - Fig. 19/a.
- Remove the supporting feet and handles from the
lift body.
FIG.19
FIG.18 FIG.15
FIG.17
FIG.16
20
c
a
b
a
b
c
a
a
b
c
a