Page 5
shading solutions by
VIMCO
TM
III. Hanging the Shades
(continued)
Hang Second Shade
Note:
The second shade does not require any modifications for mounting.
A.
Unwrap approximately 1 ft. (0.305 m) of shade material on the second shade.
B.
Attach the second shade to the adjustable hub by engaging the shade’s hexagonal socket with the hub’s hexagonal
drive ball. You may need to rotate the shade in order to push it onto the hexagonal drive ball.
C.
Insert the idler pin into the upper slot of the second idler support.
D.
Tighten the shade retaining screw (#2 Phillips Screwdriver) underneath the idler support to secure the shade in
place.
D.
Tighten the shade retaining screw underneath the idler support to secure the shade in place (see
Step D, “Hang
First Shade”
at the top of this page) .
Retaining Screw
1st Shade
2nd Shade
2nd Shade
Hang First Shade
(continued)
1
2
