The following safety information is an integral and essential part of the product and must be supplied to the user.
Read it carefully as it provides important guidelines regarding installation, use and maintenance. Always store this module carefully and transfer it to any
subsequent users of the system. Incorrect installation or improper use of the product may constitute a serious hazard.
IMPORTANT - SAFETY INFORMATION.
Installation must be performed by professionally qualified personnel in observance of current national and European legislation.
After removing the packaging check the condition of the device. If in doubt, consult a qualified technician.
Packaging materials (carton, plastic bags, staples, polystyrene, etc.) must be disposed of in suitable containers and must not be dispersed into the
environment. Above all they must be kept out of the reach of children.
The installation, electrical connections and settings must be executed in accordance with sound engineering practice. Make certain that the data on the
data plate conform with the mains electrical supply data and make certain that the section of the connection cables is suitable for the loads applied.
Do not install the product in environments where there is a risk of explosion or which are disturbed by electromagnetic fields. The presence of flammable
gases or fumes constitutes a serious hazard.
Equip the mains supply with an overvoltage protection device, a 1-way switch/disconnector and/or an RCD suited for the product and in conformity with
the standards in force.
Clearly indicate with an appropriate sign on the gate, rolling door, window or barrier that they are remotely operated.
VIMAR s.p.a. denies all liability for damage incurred when devices and/or components are used that are incompatible in terms of product integrity, safety
and operation.
This equipment must be used exclusively as specified in design; any other use is to be considered improper and therefore hazardous. Always
disconnect the equipment from the power supply by means of the main switch or by removing the plug before performing maintenance or cleaning. Use
exclusively genuine spare parts for repairs and replacements.
The installer must provide all information regarding operation, maintenance and use of the single parts and the system as a whole
Contents: .................................................................................................................................................................Page
1. Product characteristics. .................................................................................................................................................................................21
2. Technical data. ..............................................................................................................................................................................................21
3. Preparing the wiring. .....................................................................................................................................................................................21
4. Description of the control unit. .......................................................................................................................................................................22
5. Electrical wiring. ............................................................................................................................................................................................23
6. Description of the LEDs in the circuit. ...........................................................................................................................................................28
7. Push buttons in the circuit. ............................................................................................................................................................................28
8. Preliminary check. .........................................................................................................................................................................................28
9. Programming and deleting the remote control. ............................................................................................................................................29
10. Programming. ................................................................................................................................................................................................30
11. Testing the automatic gate system. ...............................................................................................................................................................35
12. Trimmer for adjustments. ...............................................................................................................................................................................35
13. Dip switch functions. ......................................................................................................................................................................................35
14. Troubleshooting. ............................................................................................................................................................................................36
Declaration of Conformity. .............................................................................................................................................................................37
20
SW230.T / SW230.T.120
EN
