4.
Notification messages
The following screen appears in the device start-
up phase and the user must wait for the start-up
phase to complete. Wait for the phase to complete.
If other messages persist, contact the installer.
Loading...
Starting
5. Indicators
The device has LEDs used specifically for signalling, in the top left-hand corner.
Icon
LED
Colour
L1
Red
L2
Green
L3
Green
5.1
Normal operation
Status
LED
Call in progress
L3 flashing
Communication active
L3 ON
Lock activated
L2 ON
Missed communication (user busy or offline)
L1 ON
Video message recording in progress
L3 ON, L1 flashing
5.2
Device start-up
Status
LED L3
LED L2
LED L1
A - Switch-on
ON
ON
ON
B – Secondary module detection
OFF
OFF
Flashing
1
C – Secondary module firmware updating in progress
OFF
Flashing
1
Flashing
1
D1 – Device awaiting configuration
Flashing
1
Flashing
1
Flashing
1
D2 – Device configured but not operational
Flashing
2
Flashing
2
Flashing
2
D3 – Device operational
OFF
OFF
OFF
1
Times: 0.25 s ON, 0.75 s OFF.
2
Times: 1.00 s ON, 0.75 s OFF.
6.
Configuration
Refer to the installer manual.
17
EN
PIXEL UP: 40414