5.
Entry control
When there is a keypad on the outdoor station, the display shows the feedback of the operation of the entry control mode.
This mode lets you activate a previously configured command (e.g. lock, relay, etc.).
For its operation, please refer to the instructions of the keypad module, summarized here.
5.1. Operation
The keypad has 2 function keys referred to here as
and
.
Press the
button to enter “Code Entry” mode on the display.
Each time a digit key is pressed, the display will show the digit for a short time and then overwrite it with an asterisk.
The code entered is confirmed by pressing
again.
The
key is used to cancel any digits entered or if no digits have been entered, to return to the home page.
The device returns
the status information
associated with the
entry control phase:
Code
Delete
Confirm
Code
Delete
Confirm
Code
Delete
Confirm
Access to the mode
for Entry control
Entering code
Waiting for
confirmation
After entering a code
two signals appear, de-
pending on the result of
the operation.
If the code corresponds
to the lock activation of
the local entrance pan-
el, the door open icon is
displayed instead of the
completed icon.
Done
Wrong Code
Door Opened
Done
Not completed
Door open
42
EN
41018
