Viale Vicenza 14
36063 Marostica VI - Italy
www.vimar.com
20593 02 2110
WEEE - User information
The crossed bin symbol on the appliance or on its packaging indicates that the product at the end of its life must be collected separately
from other waste. The user must therefore hand the equipment at the end of its life cycle over to the appropriate municipal centres for the
differentiated collection of electrical and electronic waste. As an alternative to independent management, you can deliver the equipment you
want to dispose of free of charge to the distributor when purchasing a new appliance of an equivalent type. You can also deliver electronic
products to be disposed of that are smaller than 25 cm for free, with no obligation to purchase, to electronics distributors with a sales area
of at least 400 m
2
. Proper sorted waste collection for subsequent recycling, processing and environmentally conscious disposal of the old
equipment helps to prevent any possible negative impact on the environment and human health while promoting the practice of reusing and/
or recycling materials used in manufacture.
• Protection degree: IP20
• Configuration from View Wireless App for Bluetooth technology system and Amazon App for
Zigbee technology.
• Controllable via View App.
OPERATION IN Bluetooth technology MODE.
The device operates by default in Bluetooth technology mode and this standard makes it possible
to associate the radio control 03925 which can be configured to control the actuator on-board
or to recall a scenario.
If configured in the “Energy” application, the radio control forces the output on (by pressing
the upper key) and removes the forcing (by pressing the lower key)
Through the use of gateway 20597-19597-16497-14597 the functions can be managed locally
or remotely via the View App, and the control is also available via the voice assistants Alexa,
Google Assistant and Siri.
The device is also compatible with Homekit.
N.B.: From fw version 1.7.0, the device works as a repeater node for battery-operated devices
(for instance art. 03980).
Settings.
The View Wireless App can be used to set the following parameters:
- RGB LED for backlighting: colour can be selected from a default list (default: amber for Eikon,
blue for Arké and green for Plana).
- LED brightness: off, low, medium, high for active load (default setting: high) and for load off
(default: off).
CONNECTIONS
FRONT AND BACK VIEW
L
N
20593
L
N
μ
1
100-240V~
50/60Hz
16A
Relay output
L
N
L
N
μ
1
100-240V~
50/60Hz
16A
1. Example of connection to the load
2. Example of connection to the socket outlet
L
N
20593
L
N
μ
1
100-240V~
50/60Hz
16A
20210
VIMAR SPA
VIALE VICENZA 14
36063 MAROSTICA VI
ITALY
10 mm
LED
Front push button for load control
and configuration/reset
- Load cut-off threshold function: active or not active (default: not active).
- Consumption threshold for load cut-off (default: 3680 W).
- Load status when the voltage is restored: off, on or previous status (default: previous status).
- Relay operation: two-position stable or one-position stable (default: two-position stable).
- One-position stable activation time (default: 60 s).
REGULATORY COMPLIANCE.
RED Directive. RoHS directive.
Standards EN 60669-2-1, EN 301 489-17, EN 300 328, EN 62479, EN 50581.
Vimar SpA declares that the radio equipment complies with Directive 2014/53/EU. The full text
of the EU declaration of conformity is on the product sheet available on the following website:
www.vimar.com
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.
The Apple, iPhone and iPad logos are trademarks of Apple Inc., registered in the United States and in other Countries and
Regions. App Store is a service trademark of Apple Inc. Google is a trademark of Google LLC. Amazon, Alexa and all related
logos are trademarks of Amazon.com, Inc. or its affiliates.
