23
9.
external probe setting
10.
and
multi-function input setting
11.
OnOff/PID temperature control algorithm setting
12.
energy probe setting
13.
buzzer (beep) setting
14.
display colour setting
15.
standby brightness level setting
16.
device info
17.
lock/unlock PIN setting
Touching
opens the submenu and then the flashing highlights the parameters of the sub-
menu.
7.1 Operating mode setting
This menu is used to select the operating mode of the device:
•
Manual
•
Automatic
•
Off
•
Antifreeze (only if the thermostat is set on "heating")
Using
and
select the desired mode and confirm with
.
7.2 Programming via smartphone
This menu lets you program the device via a smartphone.
On touching
the timer-thermostat is ready to receive the data. The user then needs to
initiate data transmission from the smartphone within 10 seconds.
After receiving the configuration packet the timer-thermostat beeps in confirmation and goes back to the
previous screen.
If, within 10 seconds, the timer-thermostat receives no data or receives an incorrect configuration (eg, the
smartphone has its volume set too low, it is too far away, etc.), the thermostat will display "
Err
"; then, to
do the programming, you will need to repeat the procedure again.
IMPORTANT: To perform the programming correctly, have your smartphone at approximately 10
cm from the timer-thermostat.
Содержание 02955
Страница 1: ...Instructions manual Timer Thermostat 02955 Installer Manual ...
Страница 2: ......
Страница 39: ...37 ...
