Vimar 01740, Руководство по установке

Страница: 24 / 26

22
By-alarm
Installation
N.B. To arrange the walk test, make sure Dip switch 1 is set to "ON” before securing the cover on the main unit.
6. Determine the horizontal detection angle and connect the fixing element.
2
1
3
Ensure the fixing element
and mounting bracket
click into place correctly.
Align the detection area to ensure it is
parallel with the wall to reduce
interference with the wall.
When the unit is installed in a corner,
facing forward along the wall, choose
the guide mark situated on the
opposite side of the wall.
When the unit is installed on
the wall, facing across it,
choose the engraved guide
mark.
7. Determine the detection range.
If 2 m are necessary, turn the
lower lens by 180 degrees.
1
3
2
180°
5m
5m
(m)
(m)
0
0 1 2 3 4 5
0.8
1.0
1.2
Side view
Detection range 5m
Detection range 2m
2m
2m
(m)
Side view
(m)
0
0 1 2 3 4 5
0.8
1.0
1.2
8. Fasten the cover of the main unit. 9. Perform the walk test (see chap. 8).
1
2