Vimar 01740, Руководство по установке

Страница: 19 / 26

17
By-alarm
3.2 Balancing resistor connection.
Since the alarm and fault outputs share the COM terminal, make the connections as indicated below.
4. DETECTOR CONFIGURATION
Configuration is done using the dip switches found on the device electronic board.
Connections - Detector configuration
Double EOL
Alarm relay Problem relay Tamper-proof 1-way switch
1 2 3 4 5 6 7
Terminal
positive (+)
Terminal
negative (-)
Alarm
(N.C./N.O.)
COM
Signalling
Faults (N.C.)
Device
Tamper-proof
(N.C.)
Device
Tamper-proof
(N.C.)
Alarm-EOL-Resistor Tamper-EOL-Resistor
Control panel Control panel
Alarm relay Problem relay Tamper-proof 1-way switch
1 2 3 4 5 6 7
Terminal
positive (+)
Terminal
negative (-)
Alarm
(N.C./N.O.)
COM
Signalling
Faults (N.C.)
Device
Tamper-proof
(N.C.)
Device
Tamper-proof
(N.C.)
Alarm-EOL-Resistor Tamper-EOL-Resistor
Control panel Control panel
Triple EOL
Alarm relay Problem relay Tamper-proof 1-way switch
1 2 3 4 5 6 7
Terminal
positive (+)
Terminal
negative (-)
Alarm
(N.C./N.O.)
COM
Signalling
Faults (N.C.)
Device
Tamper-proof
(N.C.)
Device
Tamper-proof
(N.C.)
Alarm-EOL-
Resistor
Faults-EOL-
Resistor
Tamper-EOL-
Resistor
Control panel Control panel
ON
1 2 3 4
ON
1 2 3 4
Do not touch the board with
the exception of the dip
switches and the terminal.
1
LED
2 ALARM OUTPUT
3
PIR SENSITIVITY
4 ANTI-MASKING