Vimar 01504.2, Руководство по установке

Страница: 9 / 14

9
ETS-Parameters line coupler
ETS-Text
Selection
[
Factory default]
Comment
Configuration
groups: filter, physical: block groups, physical: filter
groups: route, physical: filter groups, physical: route
configure
[groups, physical: filter]
- Block : no telegram is routed.
- Filter : only telegrams are routed which are entered in the filter table.
- Route : the telegrams are routed.
-
Configure: the following parameters can be set manually.
This parameter is to be set depending on the planed configuration.
Group telegrams
1. transmit all (not recommended)
2. block
3. filter
[filter]
1. All group telegrams are transmitted.
2. No group telegram is transmitted.
3. Only Group telegrams entered in the filter table are routed.
ETS3/4 produces the filter table automatically.
Main group
telegrams 14/15
1. transmit all
2. block
[
transmit all]
1. Group telegrams with the sub group 14 or 15 (e.g. 14/1) are routed.
2. Group telegrams with the sub group 14 or 15 (e.g. 14/1) are not routed.
Physical telegrams
1. transmit all (not recommended)
2. block
3. filter
[filter]
1. All Physical telegrams are transmitted.
2. No Physical telegram is transmitted.
3. Depending on the physical address only Physical telegrams are routed.
Physical:
Repetition when
errors on main line
1. no
2. normal
3. reduced
[normal]
If a transmission error (e.g. due to missing receiver) is found after sending a
Physical telegram on the main line:
1. Physical telegrams are not repeated.
2. Physical telegrams are repeated up to three times.
3. Physical telegrams will be repeated only once
Group:
Repetition when
errors on main line
1. no
2. normal
3. reduced
[normal]
If a transmission error (e.g. due to missing receiver) is found after sending a
Group telegram on the main line:
1. Physical telegrams are not repeated.
2. Physical telegrams are repeated up to three times.
3. Physical telegrams will be repeated only once.
Telegram
confirmations on line
1. if routed
2. always
[if routed]
1. Only telegrams which are to be routed are confirmed on the main line
(ACK).
2. Each telegram on the main line is confirmed (ACK).
Send confirmation
on own telegrams
1. yes
2. no
[no]
1. Every telegram on the main line is confirmed with its own ACK (from the
Line coupler).
2. No confirmation with own ACK
 See note below.
Fig. 7: Sub line configuration
Please note:
If the parameter “Send confirmation on own telegrams” is set to yes the line coupler will send an ACK systematically on any own routed telegram.
6.4 Sub line