13
ETS-Parameters line repeater
8.3 Sub line
Fig. 11: Sub line configuration
ETS-Text
Selection
[Factory default]
Comment
Configuration
groups, physical: route configure
[groups, physical: route]
-
Route
: the telegrams are routed.
-
Configure
: the following parameters can be set physically.
Physical telegrams
1. transmit all
2. block
[transmit all]
1. All physical telegrams are transmitted.
2. No physical telegram is transmitted.
Physical: Repetition
if errors on the sub
line occur
1. no
2. normal
3. reduced
[reduced]
If a transmission error (e.g. due to missing receiver) is found after sending a
Physical telegram on the main line:
1. Physical telegrams are not repeated.
2. Physical telegrams are repeated up to three times.
3. Physical telegrams will be repeated only once.
Group: Repetition if
errors on the sub
line occur
1. no
2. normal
3. reduced
[reduced]
If a transmission error (e.g. due to missing receiver) is found after sending a
group telegram on the main line:
1. Physical telegrams are not repeated.
2. Physical telegrams are repeated up to three times.
3. Physical telegrams will be repeated only once.
Telegram
confirmations on line
1. if routed
2. always
[always]
1. Only telegrams which are to be routed are confirmed on the sub line
(ACK).
2. Each telegram on the sub line is confirmed (ACK).
Send confirmation
on own telegrams
1. yes
2. no
[yes]
If a transmission error (e.g. due to missing receiver) is found after sending a
group telegram on the main line:
1. Physical telegrams are not repeated.
2. Physical telegrams are repeated up to three times.
3. Physical telegrams will be repeated only once..
