Vimar 0072031B45CB, Руководство по установке, Страница: 4 / 32

4
1. Product Description
The basic function of the 01548 router is to ensure KNX IP/Ethernet devices (main line) interact with KNX TP bus devices (secondary line) . It is powered by the TP bus and
does not require an external power supply . The router is designed to route traffic based on the type of installation in the bus system hierarchy and according to the filter tables
incorporated for communication towards groups . The secondary line configuration can be deactivated . When used as an interface, the device has configuration, commis-
sioning, display, protocol and diagnostics functions . The operating and filter statuses, the faults and the communication errors are indicated via LEDs . The device supports
messages with up to 240 bytes APDU length and it features the “Function” button to deactivate the filter temporarily during commissioning or troubleshooting .
The device is for KNXnet/IP (Secure) Routing and Tunnelling and it is equipped with a dedicated QR code to be used with ETS (version 5 .5 and later) during configuration .
The Secure Tunnelling, Secure Commissioning and IP Backbone Protection can be activated .
The 01548 router is displayed on the network; the device settings can be set, the functions activated and the 60-minute busload history can be displayed via web . Moreover,
the “bootloader” function enables the remote updating of the firmware via IP/Ethernet .
1.1 Front Panel
01548
State
Traffic
Function
IP
TP
GA
PA
ROUTER IP KNX
Program
2
A
4
6
D
1
3
5
7
C
B
Figure 1: Front View
Table 1: Front Panel Elements
LEDs Buttons / Connectors
1 State IP (Main line) A Ethernet Connector
2 Bus State KNX TP (Subline) B Function Button
3 Telegram Traffic IP (Main line) C Programming Button
4 Telegram Traffic KNX TP (Subline) D KNX TP Connector
5 Group Address Routing*
6 Individual (Physical) Address Routing
7 Programming LED
* only group telegrams with main groups 0…13
Product Description