7/12
NT00000584-PILOT-PARC-ESCLAVE-AN-200723
3.4 Cable gland
Cable diameter tolerance range (mm):
ISO M16
ISO M25
ISO M32
ISO M40
ISO M50
ISO M63
4.5-10
10-17
17-25
22-33
28-38
32-44 or 36-52*
* For PILOT PARC ratings 185 and 225A.
Rated current
of HS motor
(max. in A)
Power supply
Power output
Control
Type
Number
Type
Number
Type
Number
9
ISO M25
1
ISO M25
2
M16
2
18
ISO M25
1
ISO M25
2
25
ISO M32
1
ISO M32
2
32
ISO M32
1
ISO M32
2
50
ISO M40
1
ISO M40
2
65
ISO M50
1
ISO M50
2
80
ISO M50
1
ISO M50
2
95
ISO M63
1
ISO M63
2
115
ISO M63
1
ISO M63
2
150
ISO M63
1
ISO M63
2
185
ISO M63
1
ISO M63
2
225
ISO M63
1
ISO M63
2
3.5 Wiring diagrams: see § "7. ANNEXES", page 8
4.
COMMISSIONING
Product operation = refer to the instructions of PILOT PARC MASTER.
5.
MAINTENANCE
Annual maintenance or more often if it is necessary.
6.
WASTE MANAGEMENT
6.1 Treatment of packaging and General Industrial Waste (GIW)
The packaging (pallets not on deposit, cartons, films, wooden boxes) and other GIW must be made reus
-
able by an approved service provider.
It is strictly prohibited to burn, bury or dump them in the natural environment.
6.2 Treatment of Professional WEEE
This product must not be dumped or treated with household refuse, but must be dropped off at an appro
-
priate collection point for waste electrical and electronic equipment (WEEE).
