ViM JBRB ECOWATT PR, Инструкция по эксплуатации

Страница: 37 / 48

37/48 NT00000603-JBRB-ECOWATT-PR-AN-191202
6.13.2 Step 2: by cycle, setting of type of operation in clock mode
For each cycle, the possible main mode and clock mode combinations are:
Main mode Possible clock modes Comment
COP COP or CAV and Off*
in CAV, air volume MUST be measured by LP sensor
CAV CAV or COP and Off*
in COP, pressure MUST be measured by AP sensor
VAV VAV or COP and Off*
in COP, pressure MUST be measured by AP sensor
* Off = selected setting = 0
SYSTEM
CONFIGURATION
2 x
1 - CONFIGURATION
CLOCK
4 x
P107 CYCLE1
OPERATING*MODE
CYCLE1MODE: COP
Set to desired operating mode
CYCLE1MODE: CAV*
*Example
*
Example given for CYCLE1. To modify CYCLE2 replace the P107 steps with the following:
P141 CYCLE2
OPERATINGMODE
CYCLE2MODE:COP
Set to desired operating mode
CYCLE2MODE:CAV*
*Example
6.13.3 Step 3: by cycle, setting of time slots
Cycle 1 Setting number Cycle 2 Setting number
Slot 1 - Cycle 1
Start time: P108
Slot 1 - Cycle 2
Start time: P142
End time: P109 End time: P143
Slot 2 - Cycle 1
Start time: P116
Slot 2 - Cycle 2
Start time: P150
End time:
P117
End time:
P151
Slot 3 - Cycle 1
Start time: P124
Slot 3 - Cycle 2
Start time: P158
End time: P125 End time: P159
SYSTEM
CONFIGURATION
2 x
1 - CONFIGURATION
CLOCK
5 x
P108 CYCLE1*START
SLOT1
CYCLE1-SLOT1START:
00:00
Set desired hour
CYCLE1-SLOT1START:
10:00
Set desired minutes
CYCLE1-SLOT1START:
10:30*
*Example
P109 CYCLE1END
SLOT1