Villager VLP 1610, Руководство пользователя, Страница: 20 / 137

4
j) Before starting to work always check that the chisel or drill bit is properly locked in the
chuck.
k) Hold the tool firmly with both hands while working and provide for secure footing. The
tool is more securely guide with both hands.
l) Wait until the machine has come to a standstill before placing it down. The insertion
tool can be come caught and lead to loss of control over the machine.
m) The screw of machine can come loose easily, and causing a breakdown or accident.
Check tightness of the srew carefully before operation.
n) Do not touch the bit or parts close to the bit immediately after operation. They may be
extremely hot and could burn your skin.
o) In cold weather or when the tool has not been used for a long time. Let the tool warm
up for a while by operating it under no load.
p) Some material contains chemicals which may be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material supplier safety data.
HEALTH ADVICE
WARNING! When drilling, sanding, sawing or grinding, dust particles will be
produced. In some instances, depending on the materials you are working with, this dust
can be particularly harmful to you (e.g. lead from old gloss paint).
You are advised to consider the risks associated with the materials you are working with
and to reduce the risk of exposure. You should:
-
Work in a well-ventilated area.
-
Work with approved safety equipment, such as those dust masks that are specially
designed to filter microscopic particles.
Double insulation:
The tool is double insulated. This means that all the external metal parts are electrically
insulated from the mains power supply. This is done by placing insulation barriers between
the electrical and mechanical components making it unnecessary for the tool to be
earthed.
Important note:
Be sure the supply is the same as the voltage given on the rating plate.
Remove the mains plug from socket before carrying out any adjustment or servicing.