Villager VLN 9320, Инструкция по эксплуатации

Страница: 17 / 117

4
Find a suitable location. If the machine is bench mounted, the location should provide
good natural light or artificial lighting as a replacement. Avoid damp and dust locations as
it will have a negative effect on the machine’s performance. If the machine is portable do
not expose the tool to rain. In all cases do not operate power tools near any flammable
materials.
Keep bystanders away. Children, onlookers and passers by must be restricted from
entering the work area for their own protection. The barrier must extend a suitable
distance from the tool user.
Unplug and house all power tools that are not in use. A power tool should never be left
unattended while connected to the power supply. They must be housed in a suitable
location, away locked up and from children. This includes battery chargers.
Do not overload or misuse the tool. All tools are designed for a purpose and are limited to
what they are capable of doing. Do not attempt to use a power tool (or adapt it in any way)
for an application it is not designed for. Select a tool appropriate for the size of the job.
Overloading a tool will result in tool failure and user injury. This covers the use of
accessories.
Wear personal protective equipment (PPE). Dust, noise, vibration and swarf can all be
dangerous if not suitably protected against. If the work involving the power tool creates
dust or fumes wear a dust mask. Vibration to the hand, caused by operating some tools for
longer periods must be protected against. Wear vibration reducing gloves and allow long
breaks between uses. Protect against dust and swarf by wearing approved safety goggles
or a face shield. These are some of the more common hazards and preventions, however,
always find out what hazards are associated with the machine/work process and wear the
most suitable protective equipment available.
Move the machine as instructed. If the machine is hand held, do not carry it by the power
supply cable. If the product is heavy, employ a second or third person to help move it
safely or use a mechanical device. Always refer to the instructions for the correct method.
Maintain your tools correctly. A well maintained tool will do the job safely. Replace any
damaged or missing parts immediately with original parts from the manufacturer. As
applicable, keep blades sharp, moving parts clean, oiled or greased, handles clean, and
emergency devices working.
Remove and check setting tools. Some machinery requires the use of additional tools or
keys to set, load or adjust the power tool. Before starting the power tool always check to
make certain they have been removed and are safely away from the machine.
Prevent unintentional starting. Before plugging any machine in to the power supply, make
sure the switch is in the OFF position. If the machine is portable, do not hold the machine