Villager VLN 3208, Оригинальное руководство

Страница: 26 / 97

Villager VLN 3208 (GB)
11
Torque adjustment
The drill/Screwdriver has a step torque adjustment, in order to avoid damage to
the screw-heads or drills
⚫
By turning the torque control, you can set the necessary step from 1
(easily-to-turn screws) to the maximum available torque setting (hard-to-turn
screws).
If the torque adjustment setting is not suitable for the screw, continue adjusting
until the proper torque is obtained.
⚫ For drilling purposes, turn the torque control on last step “drilling”. In this
setting the slip clutch is inactive and the torque is maximum.
Always select the appropriate torque setting for the work The correct torque
depends on the type and hardness of the material, on the type and length of
screws, on specific working requirements.
Switching On/Off
Switching on:
Press on/off switch
Switching off:
Release on/off switch