Villager VLN 2620, Руководство пользователя

Страница: 23 / 81

10
Replacement of the Carbon Brushes
Fig. 5
For safety reasons, the machine automatically switches off if the carbon brushes are
so worn out that they no longer have contact with the motor. In that case, the carbon
brushes must be replaced by a pair similar carbon brush available through the after-
sales service organization or qualified professional person. Loosen the carbon brush
cover anti-clockwise with using a screwdriver, open the cover and remove the carbon
brushes.
If they are 6 mm or less then they must both be replaced. Fit new carbon brushes and
replace the brush housing.
CAUTION: The brushes must always be replaced in pairs.
CAUTION: Always disconnect the machine from the power supply before removing any
electrical covers.
ENVIRONMENTAL PROTECTION AND DISPOSAL
CAUTION! This product has been marked with a symbol relating to
removing electric and electronic waste. This means that this product shall
not be discarded with household waste but that it shall be returned to a
collection system which conforms to the European WEEE Directive.
Contact your local authorities or stocks for advice on recycling. Then it will
be recycled or dismantled in order to reduce the impact on the
environment. Electric and electronic equipment can be hazardous for the
environment and for human health since they contain hazardous
substances.