Villager VCPS 0820, Оригинальная инструкция по эксплуатации, Страница: 35 / 234

11
Villager VCPS 0820 (EN)
Safety instructions for cordless pole saw
a) THIS DEVICE CAN CAUSE SERIOUS INJURIES. Carefully read instructions for
proper handling, preparation, maintenance, starting and stopping the device.
Get to know all the controls and the proper use of the device.
b) Never allow children to use this device.
c) Never operate the device when other persons, especially children, are around.
d) Get dressed properly! Do not wear loose (wide) clothes or jewelry, as they can
be caught in moving parts. Use solid gloves, non-slippery shoes and protective
goggles.
e) Remove the battery pack:
−
cleaning or when removing the lock.
−
before inspecting, cleaning or working on the device.
−
whenever the machine is left by the user
f) Always enable a safe and secure working position while working with the
device, especially when using stairs or ladders.
g) Do not attempt to repair the device, unless you are qualified for this operation.
h) Do not work with a device on which the cutter is damaged or extremely worn.
i) Warning noise level and the need for protection.
j) Always check if all handles and guards are in place when using the device. Never
use an uncomplete device or the device with unauthorized modifications.
k) Where the pole saw is equipped with more than one handle, always use both
hands for handling.
l) When transporting or storing the device, always install the guard for the cutter.
m) Instructions for proper use and indication that the device should not be used
for other purposes have to be followed.
n) Learn how to quickly stop the device in case of emergency.
o) Always consider your environment and be careful about possible hazards that
you will not hear due to the noise generated by the device.
p) If the cutting mechanism strikes any foreign object or the pole saw starts
making any unusual noise or vibration, shut off the power source and allow the
pole saw to stop.
-
Inspect for damage
- Check and thightena all nuts, wedges and screws to ensure a safe working
state
- If damage was done to the device, contact the official service, so that the
repair and replacement of original parts can be done by qualified person
q) Ensure that the pole saw is correctly located in a designated working position
before starting the machine.