Villager ET 555, Инструкция по эксплуатации

Страница: 27 / 165

Villager ET 555 (GB)
others in the vicinity make contact with the tool or extension cord.
4. Store tools safely. When not in use tools should be stored in a dry, high place or
locked up out of the reach of children.
5. Do not force the tool. The tool will do the job better and more safely working at the
rate for which it was designed.
6. Use the correct tool for the job. Do not force small tools or attachments to do the job
best handled by a heavy duty tool. Never use a tool for a purpose other than that for
which it was intended.
7. Dress correctly. Do not wear loose clothing or jewellery, they can get caught in
moving parts. Rubber gloves and nonslip footwear are recommended when working
outdoors. If you have long hair wear a protective hair covering
8. Use safety accessories. Safety glasses and ear protectors should always be worn. A
face or dust mask is also required.
9. Do not abuse the power cord. Never pull the cord to disconnect the tool from the
power point. Keep the cord away from heat, oil and sharp edges.
10. Look after your tools. Keep tools clean for better and safer performance and follow
the instructions regarding lubrication and accessory changes. Inspect extension cords
periodically and replace them if damaged. Keep tool handles dry, clean and free from
oil and grease.
11. Disable idle tools. Switch off the power and disconnect the plug from the power
before servicing, when changing accessories and when the tool is not in use.
12. Avoid unintentional starting. Alway check that the switch is in the OFF position
before plugging in the tool to the power supply. Do not carry a plugged in tool with
your finger on the switch.
13. Use outdoor rate extension cords. When a tool is used, use only extension cords that
are intended for outdoor use and are so marked.
14. Stay alert. Watch what you are doing. Use common sense. Do not operate a power
tool when you are tired.
15. Check for damaged parts. Before using a tool, check that there are no damaged
parts. If a part is slightly damaged, carefully determine if it will operate properly and
perform its intended function. Check for alignment of moving parts, binding of
moving parts, breakage of part’s proper mounting and any other conditions that may
affect the operation of the tool. A guard or other part that is damaged should be
properly repaired or replaced by an authorized service facility unless otherwise
indicated in this Instruction Manual. Defective switches must be replaced by an
unauthorized service facility. Do not use a tool if the switch does not turn the tool on
and off correctly.
16. Guard against electric shock. Prevent body contact with grounded objects such as
water pipes, radiators, cookers and refrigerator enclosures.
17. Use only approved parts. When servicing use only identical replacement parts. Use
an authorized service facility to fit replacement parts.
18. Be aware of the harmful/toxic dusts arising from grass trimming etc, (e.g. fertilizers,
insecticides).
19. The use of improper accessories or attachments other than recommended can lead