Villager DM 14 PE, Инструкция по эксплуатации

Страница: 26 / 173

Villager DM 14 PE (GB)
11
a. Put the dust gate handle to the
lowest position before starting the
engine, otherwise chemicals will be
jetted when starting engine.
b. It is prohibited to stand in front of
nozzle. Even though dust gates closed,
residual dust in pipe will be blown out.
(6) Misting/Dusting
a. It is fine to carry out operation
during cool weather with little wind.
For example, in the early morning or in
the late afternoon, this can reduce the
evaporation and drift of chemicals and
improve the protecting effect.
b. Operator should move windward.
c. Review area to be cleared. Look for
potential hazards such as stones or
metal objects. Spectators and fellow
workers must be warned, and children
and animals prevented from coming
nearer than 15m while the blower is in
use. Do not point the blowy pipe at
people or animals.
d. If your mouth or eyes are spattered
with chemicals, wash them with clean
water and then go to see the doctor.
e. If the operator has a headache or
dizziness, stop working at once and go
to see a doctor in time.
f.
For the operator’s safety,
misting/dusting must be carried out
strictly according to the instruction of
the
chemicals and agricultural
requirements.
7. Troubles and Remedies
(1) Engine starts difficultly or can not
start. Cherk if the sparking plug has
sparked-over.
Screw down the
sparking plug, put the side pole to
touch the cylinder. Pull the starter and
watch between the poles of sparking
plug whether there are sparks. Pull the
starter carefully, do not touch the
metal part of sparking plug for
prevention of getting an electric shock
as shown in Fig.12.
Fig 12