Villager DM 14 P, Оригинальное руководство пользователя

Страница: 15 / 71

Villager
DM 14 P (GB)
15
b. Dry filter before reinstaling
c.Clean stains or carbon off the spark plug and adjust spark gap to 0.6-0.7mm.
d.The plug model of this machine is 4106J. Do not use other models. If it is necessary
for change. May buy it from local agricultural department or plant protection
department.
as shown in Fig.14.
Note:
a)The work including maintenance,
cleaning and adjusting must be done
after stopping the machine and out of the danger range.
b)When maintenance, the discharge
spout can’t be award to the maintenance man.
c)Please periodic check the braces
situation. Without delay replace the wornout braces.
(4)Long time storage
a.Clean the machine and apply antirust oil to metal parts.
b.Remove the spark plug and pour 15-20g of 2-stroke engine oil into the cylinder
through the spark plug pole. Pull the starter handle 4-5 times to distribute the oil
inside the engine. Pull the handle slowly until the piston reaches the top of its travel
and leave it there, then install the spark plug.
c.Remove the chemical tank, clean the dust gate and inside and outside of chemical
tank, then install the tank and leave the lid loose.
d.Remove spray units and clean them. Store by themselves.
e.Discharge fuel in he tank and carburetor entirely.
f.Cover the machine with plastic dustcoat and store it in a dry and clean place.