Villa Sistemi Medicali ROTOGRAPH-D, Руководство пользователя

Страница: 38 / 56

USER'S MANUAL
Operating instructions
(Rev. 1) ROTOGRAPH-D (120V) 33
6.3.2
6.3.2 6.3.2
6.3.2 Performing the TMJ2 examination
Performing the TMJ2 examination Performing the TMJ2 examination
Performing the TMJ2 examination
6.3.2.1
6.3.2.1 6.3.2.1
6.3.2.1 Preparing the equipment
Preparing the equipment Preparing the equipment
Preparing the equipment
If acting on key (30) the message "
Equipment not set " is displayed and
the relevant function LED blinks, push the button a second time in order
to display the message concerning the interlock to be enabled on the
sensor.
The messages that can be read during the Panoramic function setting
and the relevant actions to perform are the following:
3. Digital Sensor not Ready: activate the QuickVision program and
wait for the completion of the initial check.
4. Select TMJ2: it is necessary to select TMJ2 with the dedicated
button (15) positioned near the sensor.
NOTE:
THE SELECTION DONE ON THE HAND CONTROL MUST BE
CONSISTENT WITH THE SELECTION DONE WITH THE BUTTONS
POSITIONED IN THE AREA OF THE DIGITAL SENSOR
.
NOTE:
Operator has to evaluate the needs to increase the kV selection of
one step; from some clinical results; this will increase image’s
quality. Eventually, use a manual programming mode.