8
Electrical Connection
Use a 3-wire power supply cord kit rated for 40 amps - 125/250
volts with closed loop terminals and marked for use with
ranges. Do not use a GFI circuit. Where local codes do not
permit grounding through neutral, use a 4-wire power supply
cord. the cord or conduit must be secured to the range with
the strain relief bracket. The electrical connection is made at
the terminal block, which is located behind the access door on
the back of the range.
3-Wire Power Supply Cord
1. Remove access door.
2. Remove supply cord strain relief bracket and 3-supply cord
mounting screws on the terminal block.
3. Feed supply cord up thru the hole in the bottom of the range
back.
4. Attach the line #1 (red) and line #2 (black) leads to the
outside terminal and the neutral wire (white) to the center
terminal on the terminal block.
5. Reattach supply cord strain relief bracket over supply cord,
pushing supply cord up toward terminal block to relieve
strain before tightening.
6. Reattach access door.
4-Wire Power Supply Cord
1. Remove access door.
2. Remove supply cord strain relief bracket and 3-supply cord
mounting screws on the terminal block.
3. Remove grounding screw; cut-off and discard ground strap.
4. Feed supply cord up thru the hole in the bottom of the
range back.
5. Attach the ground lead (green) with the ground screw that
was removed in step #3.
6. Attach the line #1 (red) and line #2 (black) leads to the
outside terminal and the neutral wire (white) to the center
terminal on the terminal block.
7. Reattach supply cord strain relief bracket over supply cord,
pushing supply cord up toward terminal block to relieve
strain before tightening.
8. Reattach access door.
Access
Door
Supply Cord
Terminals
Terminal
Block
Supply Cord
Mounting
screws
Supply Cord
Terminals
Terminal Block
Supply Cord
Mounting
screws
Neutral Lead
Neutral Lead
Supply Cord
Strain Relief
Bracket
Supply Cord
Strain Relief
Bracket
Grounding
Strap
Ground Washer
Ground Wire
Grounding
Screw