42
43
Product
Care
Product
Care
WARNING
DANGER
CAUTION
FOR YOUR SAFETY
To Prevent Personal Injury
Before removing the doors, make sure the pins are properly
installed in the hinges. Failure to do so can result in personal
injury to hands and/or fingers.
WARNING
DANGER
CAUTION
FOR YOUR SAFETY
Burn or Electrical Shock Hazard
Make sure all controls are OFF and oven is COOL before
cleaning. Failure to do so can result in burns or electrical shock.
Broiler Pan and Grid
Clean with detergent and hot water. For stubborn spots, use a soap-
filled steel wool pad.
Oven Racks
Clean with detergent and hot water. Stubborn spots can be scoured
with a soap-filled steel wool pad. DO NOT CLEAN THE OVEN
RACKS USING THE SELF-CLEAN CYCLE. They could sustain
damage due to the extreme heat of the Self-Clean cycle. The oven
rack supports are designed to remain in the oven during the Self-
Clean cycle.
Meat Probe
The meat probe may be cleaned with soap and water or a soap-filled
scouring pad. Cool the probe before cleaning. Scour stubborn spots
with a soap-filled scouring pad, rinse and dry.
• Do not immerse the meat probe in water.
• Do not store the probe in the oven.
Cleaning and Maintenance
Cleaning and Maintenance
WARNING
DANGER
CAUTION
FOR YOUR SAFETY
Do not touch the exterior portions of the oven after self-cleaning
cycle has begun, since some parts become extremely hot to the
touch! During the first few times the self-cleaning feature is used,
there may be some odor and smoking from the curing of the
binder in the high-density insulation used in the oven. When the
insulation is thoroughly cured, this odor will disappear. During
subsequent self-cleaning cycles, you may sense an odor
characteristic of high temperatures. Keep the kitchen well-
vented during the self-cleaning cycle.
Self-Clean Cycle
(Lower oven only - French Door Models)
This oven features an automatic pyrolytic self-cleaning cycle. During this
cycle, the oven reaches elevated temperatures in order to burn off soil
and deposits. An integral smoke eliminator helps reduce odors
associated with the soil burn-off. A powder ash residue is left in the
bottom of the oven after completion of the Self-Clean cycle. The door
latch is automatically activated after selecting the Self-Clean setting. The
latch ensures that the door cannot be opened while the oven interior is
at clean temperatures.
Before starting the Self-Clean cycle:
1.
Remove the oven racks, and any other items/utensils from the oven.
The high heat generated during the cleaning cycle can discolor, warp,
and damage these items. The oven rack supports are designed to
remain in the oven during the Self-Clean cycle. Do not use foil or
liners in the oven. During the Self-Clean cycle foil can burn or melt
and damage the oven surface.
2.
Wipe off any large spills from the oven bottom and sides. Never use
oven cleaners inside a self-cleaning oven or on raised portions of the
door.
3.
Some areas of the oven must be cleaned by hand before the cycle
begins. Soils in these areas will be baked on and very difficult to clean
if not removed first. Clean the door up to the gasket, the door frame,
and up to 2 inches inside the frame with detergent and hot water.
Rinse thoroughly and dry.
Содержание VEDO5272BK
Страница 26: ...50 51...