This six digit number is used to access the programming mode. It is factory set to
845464
(V-I-K-I-N-G). It is recom-
mended that you change the security code to a personal 6 digit number. To change the security code, access pro-
gramming (see
Programming
section
A
). Enter six digits 0-9 followed by
#47
. If you have forgotten your security code,
follow the steps in
Programming
section
A, 3. Programming without the Security Code
.
B. Security Code
3
B. Line Powered Entry Phone to CO Line or Analog PABX/KSU Station
(Talk Battery Provided by Line In)
LED 1
LED 2
JP1
ON OFF
SECURE TOUCH TONE
RELAY CONTROLLER
MODEL SRC-1
LINE IN
1
2
3
4
7
8
9
ENTR
Y
DEVICE
5
6
TRIGGER
INPUT
PWR
RLY
TALK
BATTERY
RELAY
OUTPUT
POWER 12 V
DC
©
VIKING
ELECTRONICS
HUDSON, WI 54016
Postal Lock /
Request to
Exit Contact
OR
Doorstrike
Power Supply
5A @ 30V DC
maximum
(not included)
Doorstrike
Door
12V DC Adapter
(included)
or
*** CO Line or Analog
PABX/KSU Station
OR
OR
OR
OR
E-10A
(not included)
E-20B
(not included)
E-40-PB
(not included)
E-50-SS
(not included)
E-30
(not included)
E-35
(not included)
** K-1700-3
(not included)
** K-1705-3
(not included)
* K-1900-5
(not included)
* Note:
The
K-1900-5
Dialer is not required if installed on a ringdown circuit.
** Note:
The
K-1700-3
,
K-1705-3
or other touch tone phone required for keyless entry feature.
*** Note:
The unit must be set to
1
mode (dialing through allowed) unless installed on a
ringdown circuit.
ON OFF
SECURE TOUCH TONE
RELAY CONTROLLER
MODEL SRC-1
LINE IN
1
2
3
4
7
8
9
ENTR
Y
DEVICE
5
6
TRIGGER
INPUT
PWR
RLY
TALK
BATTERY
RELAY
OUTPUT
POWER 12 V
DC
©
VIKING
ELECTRONICS
HUDSON, WI 54016
JP1
JP1
Normal
Position
4
3
2
1
"Learn"
Position
A. Entering the Programming Mode
1. Programming with Line Powered Entry Phone Connected (Talk Battery OFF)
Step 1.
Call into the C.O. line or PABX extension connected to ‘Line In’ of the unit.
Step 2.
Come off-hook with the entry phone (all Viking handsfree phones can auto answer).
Step 3.
Enter
and the Security Code (factory 845464) from the ‘Line In’ phone.
Step 4.
Two beeps should be heard, you are now in the programming mode.
P
P
r
r
o
o
g
g
r
r
a
a
m
m
m
m
i
i
n
n
g
g
Note:
All programming must be performed from the secure (
LINE IN
) side of the
SRC-1
.
2. Programming with Adapter-Powered Doorbox Connected (Talk Battery ON)
Step 1.
Go off-hook or ring from the doorbox, or go off-hook with the ‘Line In’ phone.
Step 2.
Come off-hook with the ‘Line In’ phone, or answer with the doorbox.
Step 3.
Enter
and the Security Code (factory 845464) from the ‘Line In’ phone.
Step 4.
Two beeps should be heard, you are now in the programming mode.
3. Programming without the Security Code
Step 1.
Move
JP1
jumper onto pins 1 & 2, as shown in
the diagram right.
Step 2.
Follow steps 1 and 2 from the appropriate
procedure above.
Step 3.
Two beeps will be heard on the ‘Line In’ phone,
you are now in the programming mode.
Step 4.
After programming, move
JP1
jumper back
to pins 3 & 4.
Note:
To program a product wired to
ENTRY DEVICE
, remove power from the
SRC-1
. This prevents the
SRC-1
from reacting to touch
tones and connects
LINE IN
to
ENTRY DEVICE
.
