To avoid risk of electrical shock, personal injury, or death, disconnect electrical power source to unit. Ensure all
ground wires are connected before certifying unit as repaired and/or operational.
WARNING
!
Disassembly
©2012 Viking Preferred Service
9
Terminal board Removal
1.
Remove smooth top assembly, see Page
7.
2. Remove faulty terminal board by removing
the two outside screws shown with arrows
below.
3.
Remove wires one at a time and transfer
to new terminal block as they are removed
from the faulty terminal block.
4. Be sure to reattach the ground terminal
between the terminal block and the metal
burner box. Do not put the terminal on top
of the plastic terminal block.