background image

© 2009 Viking Preferred Service 

Warranty Information

®

4

WARRANTY SERVICE

Under the terms of this warranty, service must be performed by a factory authorized Viking Range Corporation 
service agent or representative. Service will be provided during normal business hours, and labor performed at 
overtime or premium rates shall not be covered by this warranty. To obtain warranty service, contact the dealer 
from whom the product was purchased, an authorized Viking Range Corporation service agent, or Viking Range 
Corporation. Provide model and serial number and date of original purchase. For the name of your nearest 
authorized Viking Range Corporation service agency, call the dealer from whom the product was purchased or Viking 
Range Corporation. 

IMPORTANT:

 Retain proof of original purchase to establish warranty period.

The return of the Owner Registration Card is not a condition of warranty coverage. You should, however, return the 
Owner Registration Card so that Viking Range Corporation can contact you should any question of safety arise which 
could affect you. 

Any implied warranties of merchantability and fitness applicable to the above described oven tubular burner, 
porcelain oven, or porcelain inner door panel are limited in duration to the period of coverage of the applicable 
express written limited warranties set forth above. Some jurisdictions do not allow limitations on how long an implied 
warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you 
may also have other rights which may vary from jurisdiction to jurisdiction.

VIKING RANGE CORPORATION

£££ÊÀœ˜ÌÊ-ÌÀiiÌÊUÊÀii˜Üœœ`]ʈÃÈÃÈ««ˆÊÎn™ÎäÊ1-

(662) 455-1200

www.vikingrange.com

Specification subject to change without notice

Содержание Professional VGSO166




























Отзывы: