How to remove scale from the ice making system.
Cleaning this machine involves adding a solution of scale remover and
water to the ice machine and continuing to add it as it makes ice. The
scale remover must be diluted to the correct ratio. A squirt bottle will
make adding the scale remover much easier when the unit is built in. If
not built in, remove the top panel for reservoir access.
Recommended tools: Rubber gloves, squirt bottle & scale remover.
.
1. Scoop out and discard all of the ice.
2. Press and release the On/Off button.
10
11
Care and Cleaning
(con’t)
Care and Cleaning
(con’t)
5. Push tab on front edge of reservoir cover and remove the cover.
Note: Adjacent wires are low voltage and are not hazardous.
3. Open door and locate screws at upper back wall of bin. Remove the
two screws
4. Remove the back panel of the bin by lowering it down past the
scoop holder, feel free to rotate the scoop holder loop down to
make more room.
ON/OFF
ICE
MAKING
CHECK
WATER
TIME TO
CLEAN
CLEAN
RESET
Reservoir Cover
Release Tab
Float Valve
On/Off Lever
Screws
ON/OFF
ICE
MAKING
CHECK
WATER
TIME TO
CLEAN
CLEAN
RESET
Push Tab
Lift reservoir cover to remove
