3
Installation of indoor unit
4.Put wiring cover back and then tighten the screw.
5.Close the panel.
Note:
Ɣ
All wires of indoor unit and outdoor unit should be connected by a professional.
for a new one. Avoid extending the wire by yourself.
installation.
Ɣ)RUWKHDLUFRQGLWLRQHUZLWKRXWSOXJDQ
circuit break must be installed in the line.
The circuit break should be all-pole parting and the contact parting distance
should be more than 3mm.
3. Remove the wire clip; connect the power connection wire to the wiring terminal
ZLWKZLUHFOLS$IWHUILQLVKLQJZLULQJRI.XQLWFODPSWKHJURXQGLQJZLUH\HOORZ
green wire) into the wire-crossing groov
HDVVKRZQLQWKHIROORZLQJILJXUHLQ
order to avoid pressing the wire when closing the electric box cover.
power connection
wire
cable-cross
hole
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
yellow-
green
2
3
1
Outdoor unit connection
blue
black
brown
yellow-
green
2
3
1
Outdoor unit connection
blue
black
brown
18K
09
、
12K
