12
Introduction for buttons on remote controller
12
Press this button to activate health function with " " displayed; press this button for
cancel
TEMP button
13
14
X-FAN button
press this button for the third time to activate health and air out function with " " and
" " displayed; press this button for the fourth time to activate air in function with
" " displayed; press this button for the fifth time to activate air out function with " "
displayed; press this button for the sixth time to exit health, air in or air out function.
the second time to activate health and air in function with " " and " " displayed;
button
/
Pressing this button in COOL or DRY mode, the icon " " is displayed and the indoor
fan will continue operation for 2 minutes in order to dry the indoor unit even though you
have turned off the unit. After energization, X-FAN OFF is defaulted. X-FAN is not
available in AUTO, FAN or HEAT mode.
By pressing this button, you can see indoor set temperature, indoor ambient temp-
erature or outdoor ambient temperature on indoor unit’s display. The setting on
remote controlleris selected circularly as below:
no display
Ɣ:KHQVHOHFWLQJRUQRGLVSOD\ZLWKUHPRWHFRQWUROOH
r, temperature indicator
on indoor unit displays set temperature.
Ɣ:KHQVHOHFWLQJZLWKUHPRWHFRQWUROOH
r, temperature indicator on indoor unit
displays indoor ambient temperature.
Ɣ:KHQVHOHFWLQJZLWKUHPRWHFRQWUROOH
r, temperature indicator on indoor unit
displays outdoor ambient temperature.
Note:
Ɣ
Outdoor temperature display is not available for some models. At that time, indoor
unit receives " " signal, while it displays indoor set temperature.
Ɣ,W
’s defaulted to display set temperature when turning on the unit.There is no
display in the remote controller.
Ɣ2QO\IRUWKHPRGHOVZKRVHLQGRRUXQLWKDVGXDOGLVSOD
y.
Ɣ:KHQVHOHFWLQJGLVSOD\LQJRILQGRRURU
outdoor ambient temperature, indoor
temperature indicator displays corresponding temperature and automatically turn
WRGLVSOD\VHWWHPSHUDWXUHDIWHUWKUHHRU¿YHVHFRQGV
