Viking FDWB301 Скачать руководство пользователя страница 17

33

32

Service & Registration

If service is required, call your dealer or authorized service agency. The name of the authorized
service agency can be obtained from the dealer or distributor in your area.

Have the following information readily available.
• Model number
• Serial number
• Date purchased
• Name of dealer from whom purchased

Clearly describe the problem that you are having. If you are unable to obtain the name of an
authorized service agency, or if you continue to have service problems, contact Viking Range
Corporation at (888) 845-4641 or write to:

VIKING RANGE CORPORATION

PREFERRED SERVICE

111 Front Street

Greenwood, Mississippi 38930 USA

The serial number and model number for your wine cellar are located on the right wall in the
bottom zone.

Record the information indicated below. You will need it if service is ever required.

Model number

____________________________________________________________________________________

Serial number

_____________________________________________________________________________________

Date of purchase 

__________________________________________________________________________________

Date installed 

______________________________________________________________________________________

Dealer's name 

_____________________________________________________________________________________

Address 

___________________________________________________________________________________________

If service requires installation of parts, use only authorized parts to insure protection under the
warranty.

Keep this manual for future reference.

Содержание FDWB301



















Отзывы: