The
E-70
Series entry phones are compact, weather and vandal resistant speaker phones designed to provide two-way handsfree
audio communication. The
E-70
also includes a built-in 125KHz HID compatible proximity card reader. The card reader outputs indus-
try standard 26-bit Wiegand data, allowing it to be used with a
Viking ES-1
door controller or any controller compatible with 26-bit
Wiegand format. The
E-70
's compact size allows it to be mounted in a standard double gang electrical box. The
E-70
is available in
five different attractive finishes to match your door hardware, light fixtures, etc. Replacement
E-70
faceplates (
PNL70
) can be pur-
chased separately and are available in all five standard finishes. The
E-70
entry phones can share a single phone line with house or
small business telephones when used with a
Viking
model
C-200
,
C-250
or
C-2000B
Entry Phone controller. The
E-70
entry phones
can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a
telephone line when used with a
Viking
model
K-1900-5
auto dialer. The
E-70
features a built-in proximity card reader, microphone
and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up
when the call is completed. For outdoor environments or corrosive atmospheres, the
E-70
is available with Enhanced Weather
Protection (EWP), see DOD# 859.
Entry Phones with Built-In Proximity Card Reader
• Built-in 125KHz HID compatible 26-bit Wiegand proximity card reader
with LED and beep card read confirmation and EWP board protection
• Audio and video transmission on one CAT5E cable (see page 5)
• Compact size:
Front panel is the size of a typical double gang mid-
size wall plate
• Mounting:
Flush mounts in a double gang electrical box (2.25”
deep x 3.7” wide x 2.84” tall minimum) or surface mounts in a Viking
model
VE-5x5
(not included, see DOD# 424) for mounting to a wall,
post or VE-GNP Gooseneck Pedestal (EWP recommended)
• Available in 5 standard faceplate finishes:
Brushed Stainless Steel,
Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White
• PNL-70 faceplates:
Replacement faceplates with matching screws
available in all five standard finishes
• Features:
Mylar speaker, faceplate gasket, mic and speaker gasket,
internally sealed (IP67) push button switch, self draining mic mount
and UV stable weather resistant powder coating (excludes
E-70-SS
stainless steel faceplate)
• Vandal Resistant Features:
16 gauge polished brass or 18 gauge
stainless steel faceplate, stainless steel push button, stainless
steel speaker screen, scratch resistant powder coating, hex drive
mounting screws
• Optional Enhanced Weather Protection (EWP, recommended for
outdoor applications) Features:
Urethane potted circuit board,
internally sealed POTS and dip switches, potted microphone and
push-button switch, etc.
• Blue LED helps locate the push button, indicate ringing and off-hook
• Programmable Intelligent call progress detection for automatic
hang-up on CPC, silence, busy signal, or time out
• VE-LIGHT:
Optional faceplate light kit for use with the
VE-5x5
P
P
r
r
a
a
c
c
t
t
i
i
c
c
e
e
T
T
E
E
L
L
E
E
C
C
O
O
M
M
S
S
O
O
L
L
U
U
T
T
I
I
O
O
N
N
S
S
F
F
O
O
R
R
T
T
H
H
E
E
2
2
1
1
S
S
T
T
C
C
E
E
N
N
T
T
U
U
R
R
Y
Y
TECHNICAL
TECHNICAL
F
F
e
e
a
a
t
t
u
u
r
r
e
e
s
s
Dimensions:
Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875” x 4.938” x 0.17”), Phone:
72mm x 46mm x 42mm (2.84” x 1.8” x 1.65”)
Shipping Weight:
0.55 kg (1.2 lbs)
Operating Temperature:
-34° C to 65° C (-30° F to 150° F)
Connections:
(2) gel-filled butt connectors (3M Scotchlok UR2)
(See page 2 for complete specifications)
S
S
p
p
e
e
c
c
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
P
P
h
h
o
o
n
n
e
e
.
.
.
.
.
.
7
7
1
1
5
5
.
.
3
3
8
8
6
6
.
.
8
8
8
8
6
6
1
1
h
h
t
t
t
t
p
p
:
:
/
/
/
/
w
w
w
w
w
w
.
.
v
v
i
i
k
k
i
i
n
n
g
g
e
e
l
l
e
e
c
c
t
t
r
r
o
o
n
n
i
i
c
c
s
s
.
.
c
c
o
o
m
m
i
i
n
n
f
f
o
o
@
@
v
v
i
i
k
k
i
i
n
n
g
g
e
e
l
l
e
e
c
c
t
t
r
r
o
o
n
n
i
i
c
c
s
s
.
.
c
c
o
o
m
m
E-70 Series
E-70 Series
Double Gang Entry
Phones with Built-In
Proximity Card Reader
June 17, 2009
E-70-SS
“Brushed Stainless Steel”
(similar to brushed nickel) Shown with
optional
VE-5x5
surface mount box
and
VE-LIGHT
kit (not included)
E-70-BN
“Oil Rubbed Bronze”
(satin dark brown powder
paint with fine copper metallic)
E-70-PB
“Polished Brass”
(with clear gloss powder
paint to prevent tarnishing)
E-70-WH
“Satin White”
(satin white powder paint)
E-70-BK
“Satin Black”
(fine texture satin black
powder paint)
• Door or gate communication, business delivery entrances
• Use with a
Viking C-200
or
C-250
to control one
E-70
on a single
phone line
• Use with a
Viking C-2000B
to control 1 to 4
E-70
’s and door/gate
control on a single phone line
• Use with a
Viking ES-1
for proximity card reader door control
• Provide unique front and back door chimes and paging when used
with a
Viking SLP-1
or
SLP-4
and
C-2000B
• Residential, commercial and industrial door security
• Use with a
Viking K-1900-5
for automatic speed dialing on tele-
phone lines or analog PABX/KSU station ports
• Use on any analog PABX station port with programmable ringdown
capability
