Viking DFSB542 Series, Руководство по обслуживанию, Страница: 16 / 87

© 20
10
Viking Preferred Service
16
Operation
Settings and Functions
In order for your new refrigerator to work properly,
it is important that you understand its various
features, controls, and how to use them.
Power On/Off Switch (Power Interruption Switch)
The power on/off switch is located behind your
refrigerator’s top grille. It is used to turn the power
“OFF” when cleaning the refrigerator or changing
the light bulbs. Your refrigerator arrives from the
factory with the power interruption switch “ON”.
To turn power “OFF”, remove the center grille
blade. Press the power on/off switch to the “OFF”
position.
To turn power “ON”, press power on/off switch to
the “ON” position. Replace the center grille blade.
IMPORTANT: Be sure the power on/off switch is in the
“ON” position after cleaning or changing light bulbs.
Showroom Mode Initiation
Showroom mode allows electronic controls and
interior lights to function independently of the
refrigeration system.
To enter Showroom mode: Press and hold
the “ACTIVATE CONTROLS” pad. While
holding, press and hold the “HIGHER”
and “ALARM OFF” pad simultaneously.
One beep will be heard indicating that
sequence was entered properly. Continue
holding until three beeps are heard and
then the Blue LED two steps to the right of
the “HIGH TEMP” indicator will illuminate.
Showroom mode is entered.
To exit Showroom mode: Press and hold the
“ACTIVATE CONTROLS” pad. While holding, press
and hold the “HIGHER” and “ALARM OFF” pad
simultaneously. One beep will be heard indicating
that sequence was entered properly. Continue
holding until three beeps are heard. The display will
revert to normal operation
Electronic Temperature Settings
Your refrigerator’s electronic controls
are located behind the door above the
cabinet interior. To activate the electronic
control panel, press “ACTIVATE CONTROLS” pad.
All other pads, except the “Alarm Off” pad, will
remain inactive until the ”ACTIVATE CONTROLS”
pad is pressed. Once activated, pad remains
programmable for at least ten minutes.
When you first plug your new refrigerator in, you
will find that five bars of nine are displayed. This
means that all unit controls are pre-set at the mid-
range setting. Wait 24 hours after plug-in for the
cabinets to reach this setting. After 24 hours, you
may adjust controls as desired. The warmest setting
displays one bar, while the coldest setting shows
nine bars.
To adjust the refrigerator or freezer
temperature, simply press the
”ACTIVATE CONTROLS” pad, then
“REF TEMP” pad or “FRZ TEMP” pad.
Press the “HIGHER” or “LOWER” pad to
adjust temperature setting one level at
a time. Holding down the “HIGHER” or
“LOWER” pad adjusts temperature more
than one level at a time.
Key Press Confirmation
The key press confirmation is the “beep” heard when
a control pad is pressed. The confirmation can be
activate or inactive.
To activate the key press confirmation,
press and hold the “ACTIVATE CONTROLS”
pad for three to five seconds. Three beeps
will be heard confirming the key press confirmation
has been deactivated.
To activate the key press confirmation, press and
hold the “ACTIVATE CONTROLS” pad until
confirmation beep is heard.
Power Switch