12
WIRE SHELVES
The adjustable wire shelves can be removed by lifting up on the shelf
slightly and sliding it out. To reinsert shelves, position the shelf over the
track and slide into place. The shelves are tapered at the back to allow
easy installation. The wine rack will hold 5 bottles of wine. The necks of
the bottles alternate front (rear facing) to back (front facing). The rack
holds three bottles facing to the rear and two bottles facing to the front.
Glass shelf
separating
beverage section
from wine section
Front
Rear
NOTE:
The glass shelf separates temperature zone. Do not remove
when storing wines.
CLEANING AND MAINTENANCE
Any piece of equipment works better and lasts longer when maintained properly and kept clean.
C
Co
on
nd
de
en
nsse
err
The condenser tubing inside the cabinet does not require frequent cleaning; however, satisfactory cooling depends on
adequate ventilation over the coils. Be sure that nothing obstructs the required air flow openings in front of the cabinet.
Spiders and insects can nest in and around the refrigerated beverage center causing damage to the unit. Frequently
brush or vacuum lint and dirt from the condenser coils for efficient performance by unscrewing the grill on the bottom
front of cabinet.
C
Ca
ab
biin
ne
ett
The cabinet can be washed with mild soap and water and thoroughly rinsed with clear water. Never use abrasive scouring
powders.
IIn
ntte
erriio
orr
Wash interior compartment with mild soap and water. Do not use abrasive powder, solvent, polish cleaner or undiluted
detergent.
S
Stta
aiin
nlle
essss S
Stte
ee
ell P
Pa
arrttss
All stainless steel parts should be wiped regularly with hot soapy water. Use a liquid cleaner designed for stainless steel
when soapy water will not do the job. D
Do
o n
no
ott u
usse
e steel wool, abrasive cloths, cleansers, or powders. Do not permit citrus
or tomato juice to remain on stainless steel surfaces, as citric acid will permanently discolor stainless steel.
B
Brra
assss P
Pa
arrttss
C
CA
AU
UT
TIIO
ON
N:: All brass parts have an epoxy coating. D
DO
O N
NO
OT
T U
US
SE
E B
BR
RA
AS
SS
S O
OR
R A
AB
BR
RA
AS
SIIV
VE
E C
CL
LE
EA
AN
NE
ER
RS
S O
ON
N T
TH
HE
E B
BR
RA
AS
SS
S
P
PA
AR
RT
TS
S.. All brass parts should be wiped regularly with hot soapy water. When hot soapy water will not do the job, use
every day household cleaners that are not abrasive.
G
Glla
assss D
Do
oo
orr ((IIn
nd
do
oo
orr U
Un
niittss o
on
nllyy))
Use a glass cleaner or mild soap and water with soft cloth to clean the glass door. Do not use any abrasive powders. On
full overlay models, use caution when cleaning near logo area
D
Do
oo
orr G
Ga
asskke
ett
The vinyl gasket may be cleaned with mild soap and water, a baking soda and water solution, or a mild scouring powder.
P
Pa
aiin
ntte
ed
d S
Su
urrffa
acce
ess
Wash with warm soapy water. D
DO
O N
NO
OT
T U
US
SE
E steel wool, abrasive cleansers, ammonia, acids or commercial oven cleaners
which may damage the finish.
