25
24
5
6
1
2
7
8
Pull on tubing to confirm connection is secure.
Connect tubing to frame with tubing clamp.
Turn on water supply. Check for leaks and correct if
necessary. Monitor water connection for 24 hours. Correct
leaks if necessary.
Slide brass nut over sleeve and screw nut into inlet
port. Place adjustable wrench on nut attached to plastic
waterline and maintain position.
Using second adjustable wrench, turn the lower nut
counterclockwise and fully tighten the upper nut in
place. IMPORTANT: Do not overtighten. Cross
threading may occur.
1
2
Remove toe grille. Grasp firmly and pull outward
to unclip.
To raise the front of the unit, turn the leveler foot screw
clockwise.
NOTE:
Having someone push against the top
of the refrigerator takes some weight off the leveler foot
screws.
3
4
To lower the front of the unit, turn the leveler foot screw
counterclockwise.
NOTE:
It may take several turns of the
leveler foot screw to adjust the tilt of the refrigerator.
Replace toe grill. Align the toe grille mounting clips
with the lower cabinet slots. Push the toe grille firmly
until it snaps into place. Check for level.
Leveling
To protect property and refrigerator from damage, observe the following:
• Protect vinyl or other flooring with cardboard, rugs, or other protective material.
• Do not use power tools when performing leveling procedure.
Materials Needed
• 1/4” hex head driver
• Carpenter’s level
To enhance the appearance and maintain performance, the refrigerator should be level.
NOTE:
Complete any required panel installation and/or water supply connection before
leveling. Refrigerator should be in permanent location prior to leveling.
Содержание DDFF136
Страница 16: ...31 30 ...
