DIP switch 4 provides an easy way to manually change to and from Daylight Saving Time. Moving
the switch to the ON position will add 1 hour to the present time, and moving it to the OFF position
will subtract an hour from the present time. If Daylight Savings Time is observed in your area, dip
switch 4 should be set to on between the second Sunday in March and the first Sunday in November
and set to off the rest of the year. If Daylight Savings Time is not observed in your area, leave dip
switch 4 set to off all year. Note: Dip switch 4 should be set to the correct position before setting
the clock time.
N. Second Schedule
O. Daylight Saving Time
M. Timed Relay Mode
The
CTG-1A
can run one of two manually selected schedules as set by DIP switch 3. Each schedule
can have up to 128 events in a 24 hour period as well as separate Day of Week programming.
Note:
The schedule selection should only be changed in the Time Mode.
With DIP switch 2 in the OFF positon, the
CTG-1A
will produce the selected tones at the
programmed times. With DIP switch 2 in the ON position, the unit will operate the auxiliary relay
according to the programmed times. An event programmed with the Single Tone will turn the relay
on, and an event programmed with the Double or Triple alert tones will turn the relay off. If one of
the contact closure controlled inputs (Emergency Siren, Evacuation or Doorbell) becomes active in
the Timed Relay mode, the selected tone will be produced over the audio output but the current
status of the relay will not change. The status of the relay will only change based on the
programmed event schedule.
Unplug the
CTG-1A
from power. Turn OFF Dip Switch 5 to change from 60 Hz to 50 Hz, or turn it
ON to change from 50 Hz operation to 60 Hz. Power the
CTG-1A
back up. Set the
CTG-1A
to the
current time.
P. Changing the Power Line Frequency Setting
7
