TURBO/WHIRLPOOL JET
(Viking 2P & Viking 3 only)
VOLCANO Jet
(Heritage & Tradition only)
The Turbo jet is located on the filter cavity
wall is the Turbo jet. This jet is a combination valve
and high capacity jet. To turn the Turbo jet on,
simply turn the face counter-clockwise to the first
stop position. To turn the Turbo jet off, turn the face
clockwise to bring the main jets back to full power.*
The Volcano Jet operates on a valve located in the
middle of the lounger. Turn the valve to activate the
jet. Note: this valve directs one of the pumps and
will effect the flow this pump used to power other
jets in the spa.
* Due to the substantial amount of water pressure
when the Turbo Jet is operating, you must
turn the pump to the off or low speed cycle
position before attempting to rotate the jet face.
AIR CONTROLS
Air controls are adjusted by rotating the topside
dial. These controls serve to regulate the amount
of air mixed with water when the whirlpool or
hydrotherapy jets are operating in the high pump
mode.
Viking 1P, Viking 2P, Viking 3 Only
All other models (See illus-tration on
page 14)
15
OPERATION
INSTRUCTIONS VS502
(Royale ETS, Regal ETS, Legacy, Legend, Heritage & Tradition)
