16
9. Import/Export
The Import/Export feature is useful for backing up all the
K-1775-IP’s
programming or for importing programming when
installing multiple units with a majority of the same programming.
Clicking on the “Factory Default ” button in programming will reset all of the Programming Features back to their factory
default settings.
Note:
This command will not change or reset your IP settings.
10. Factory Default
The security code allows the user/installer to program the
K-1775-IP
phone. The factory set security code is 845464.
It is recommended that the factory set security code be changed.
Note:
The security code must be 6 digits and cannot include a
Q
or a
#
.
12. Security Code
11. Diagnostics
The Diagnostics section in the
K-1700-IP
PC Programming can be used to test the functionality of the mic, speaker,
proximity card reader, and relays.
The Access Code is used for remotely operating the relays (Doorstrike, Mag-Lock, etc) by calling into the unit. This
code provides basic security and only allows operation of the relays and not the ability to change any of the programming
parameters. Once entered, any of the “Remote Access Operation Commands” can be used. The code can be 1 to 6
digits in length and cannot contain a “
Q
” or “#”. Simply call the
K-1775-IP
phone, the unit will automatically answer the
line and output one beep. You then enter the programmed 1 to 6 digit access code, 2 beeps should be heard. You can
now enter any “Remote Access Operation Commands” (see page 19).
13. Access Code
The Auto Answer/Loud Ring feature can be set to one of four modes:
Disabled
: In the “Disabled” mode the phone will not automatically answer an incoming call.
Auto Answer
(factory setting): In the “Auto Answer” mode the phone will automatically answer an incoming call on the
first ring.
Loud Ring
: In the “Loud Ring” mode the phone will not automatically answer an incoming call but will output a loud
ring signal out of the speaker in a 2 seconds on, 4 seconds off ring pattern. The call can then be answered by momen-
tarily pressing the call button.
Loud Ring with AGC
: In the “Loud Ring with AGC” mode the phone will not automatically answer an incoming call but
will output a loud ring signal out of the speaker in a 2 seconds on, 4 seconds off ring pattern. The phone will automatically
increase or decrease the ring volume based on background ambient noise. The call can then be answered by momen-
tarily pressing the call button.
14. Auto Answer / Loud Ring
15. Ring Cadence
16. Loud Ring Volume
The Loud Ring Volume can be set from 0 – 9. 1 = the lowest volume, 9 = the highest volume and 0 = disabled.
When “Auto Answer/Ring” on the
K-1775-IP
is set to “Loud Ring” or “Loud Ring with AGC” the Loud Ring cadence can
be programmed to one of 4 different cadences:
Normal Ring
(single ring, 2 sec on 4 sec off)
Double Ring
(double ring, 1 sec on .5 sec off 1 sec on 3.5 sec off)
Short-Short-Long
(triple ring, .5 sec on .5 sec off .5 sec on .5 sec off 1 sec on 3 sec off)
Short-Long-Short
(triple ring, .5 sec on .5 sec off 1 sec on .5 sec off .5 sec on 3 sec off)
