14
The Inbound Call Mode determines how the
40TB-IP
handles incoming SIP calls. One option is to generate a loud ring
sound through the speaker. The
40TB-IP
can also auto answer a SIP call to transmit a page, control the relay or listen
to transmit audio from the microphone. The last option is the silent monitor mode, which allows callers to listen to the
transmit audio from the microphone. The “secure” options for auto answer require the callers to dial the access code
in order to transmit a page, activate the relay or activate the optional
RC-4A
relays.
Disabled
– Inbound SIP calls are not allowed.
Auto Answer
– Inbound SIP calls are auto answered on the first ring. This can also be used for Silent Monitoring by
changing the speaker mode to ‘OFF/Silent Monitor”, See page 12. For more security use the Auto Answer Secure Mode.
Auto Answer Secure
– Inbound SIP calls are auto answered and the caller must dial the access code in order to listen
or talk on the unit.
Ring:
In the “Ring” mode the speaker phone will not automatically answer an incoming call but will output a loud ring
signal out of the speaker in a 2 seconds on, 4 seconds off ring pattern. The call can then be answered by momentarily
pressing the call button or the center button on the optional
BTR-3
Remote.
Ring with AGC:
In the “Ring with AGC” mode the speaker phone will not automatically answer an incoming call but will
output a loud ring signal out of the speaker in a 2 seconds on, 4 seconds off ring pattern. The phone will automatically
increase or decrease the ring volume based on background ambient noise. The call can then be answered by
momentarily pressing the call button or the center button on the optional
BTR-3
Remote.
25. Inbound Call Mode
26. Ring Cadence
The Ring cadence can be programmed to one of 4 different cadences:
Normal Ring
(single ring, 2 sec on 4 sec off) factory setting
Double Ring
(double ring, 1 sec on .5 sec off 1 sec on 3.5 sec off)
Short-Short-Long
(triple ring, .5 sec on .5 sec off .5 sec on .5 sec off 1 sec on 3 sec off)
Short-Long-Short
(triple ring, .5 sec on .5 sec off 1 sec on .5 sec off .5 sec on 3 sec off)
23. Lap Counter
With the lap counter disabled (factory setting), if the
40TB-IP
Speaker phone is programmed to dial the next number on
ring-no-answer and/or busy signal, the
40TB-IP
Speaker phone will continuously call its programmed phone numbers
forever until the call is answered.
The lap counter is a programmable counter that determines how many times the
40TB-IP
Speaker phone will cycle
through its list of up to 5 information phone numbers (or up to 5 “Emergency” phone numbers), before it stops the dialing
process and hangs up. When all of the programmed phone numbers have been dialed, the lap counter is incremented
and the dialing process repeats. When the lap counter has been met, the dialing process stops and the
40TB-IP
Speaker
phone hangs up.
Note:
This feature is disabled in the factory default setting.
This feature selects the maximum length of time that calls can be connected. Programmable in increments of 1 minute
up to a maximum of 9 minutes or disabled. With the call length disabled, the
40TB-IP
phone must rely on a call ended
signal, busy signal, silence, Ring No Answer limit, or touch tone # to hang-up.
Note:
The factory default is 3 minutes.
24. SIP Page / Call Length Time Out
22. Repeat Announcement Option
The
40TB-IP
Speaker phone can be programmed to play the announcement from 1-9 times, or to continuously repeat
the announcement every 6 seconds until a Touch Tone
Q
is detected from the distant party. The call connected LED
will turn on automatically after the announcement has stopped repeating.
Note:
The factory default for the
40TB-IP
Speaker phone is to play the voice announcement one time.