2/4
attention to the sequence of installation. The shape of parts in the following installation instructions is
only as a sigh. Please refer to the shape of the actual parts purchased.
1. Assemble upper and lower parts.
2. Assemble laser part to the frame. Please notice that the laser
wire should penetrate the gap before fix the Laser-Module(F3).
3. The side to main board wire, laser wire and upper motor wire
can be fixed with the reserved gaps.
4. Finished above. Please notice that all the belts and wires are
not shown above.
3. Control-Board and Laser
3.1 Instructions for control board (Optional)
Main Control Board
（
Left
），
Side Board
（
Right
）