21
PREPARING TO TEST:
1. Be sure area around battery is well ventilated while
battery is being tested.
2. Clean battery terminals. Be careful to keep corro-
sion from coming in contact with eyes.
3. Inspect the battery for cracked or broken case or
cover. If battery is damaged, do not use tester.
4. If the battery is not sealed maintenance free,
add distilled water in each cell until battery acid
reaches level specified by the manufacturer. This
helps purge excessive gas from cells. Do not overfill.
5. If necessary to remove battery from vehicle to test,
always removeground terminal from battery first.
Make sure all accessories in thevehicle are off to
ensure you do not cause any arcing.
REPLACEMRNT OF WIRE LEAD
1. Detach the clamp lead when the replacement is
necessary.
2. Make sure the new clamp lead is well connected
NOTE that do not detach the cables unless neces-
sary to make sure the pins are not rusted or cor-
roded by the acid liquid.
3 Design and Function
Содержание V3748
Страница 34: ......
